Пневматичен инструмент за шлайфане на клапани-ZIMBER

Пневматичен инструмент за шлайфане на клапани в комплект с 4 накрайници с различни размери.

Инструментът шлайфа клапаните чрез вертикално задвижване на буталото с гуменият накрайник, без да прави въртеливи движения. За повече информация, погледнете прикаченото ВИДЕО.!

Specification

• Max. Valve Capacity 45 mm
• Blows Per Minute 3,000
• Air Consumption 3.53 cfm (100 L/min)
• Length 153.5 mm
• Weight 1.55 kg
• Air Pressure 90 psi (6.2 bar)
• Air Inlet 1/4"
• Min. Hose Size 1/4" (6.35 mm)

• APPLY FIVE OR SIX DROPLETS OIL OR MOTOR OIL TO THE AIR VALVE LAPPER
  THROUGH ITS AIR INLET PORT. (IT IS RECOMMENDED TO APPLY OIL FROM TIME TO TIME TO THE VALVE LAPPER EVEN DURING THE OPERATION, IF THE LAPPER IS USED CONTINUOUSLY FOR AN EXTENDED PERIOD OF TIME.)
• CONNECT THE AIR HOSE TO THE LAPPER . ATTACH THE RUBBER CAP TO THE END OF THE SPINDLE. (SELECT LARGE , MEDIUM, OR SMALL RUBBER CAP IN ACCORDANCE WITH THE DIAMETER OF VALVES TO BE LAPPED.)
• IT IS ADVISABLE TO SET AIR PRESSURE AT 6 TO 8 KG/C㎡ . USE AN AIR COMPRESSOR GRADUALLY OPEN THE AIR ADJUSTING VALVE AND THE SPINDLE WILL BEGIN ITS  UP - AND- DOWN MOTION. SET THE  UP-AND-DOWN SPEED AT AN OPTIMUM SPEED SUITABLE FOR THE DIAMETER , ETC. OF VALVE .
• IF THE CENTER OF THE RUBBER CAP IS SLIGHTLY DEVIATED FROM THE CENTER OF VALVE WHILE LAPPING. THE VALVE AUTOMATICALLY TURNS BY ITSELF .
• TO PREVENT THE OCCURRENCE OF RUST. THE FOLLOWING STEPS SHOULD BE FOLLOWED UPON COMPLETION OF A LAPPING OPERATION. FIRST, REMOVE THE AIR HOSE . APPLY FIVE OR SIX DROPLETS OF THE ABOVE DESCRIBED OIL AND ROTATE THE VALVE LAPPER FOR TWO OR THREE SECONDS.
• WHEN THE SPINDLE HAPPENS TO BE AT THE BOTTOM DEAD CENTER ,THE SPINDLE MAY NOT START ITS UP AND DOWN MOTION EVEN IF THE AIR ADJUSTING VALVE IS OPENED. HENCE, WHEN THE SPINDLE WON'T START, LIGHTLY PUSH UP THE SPINDLE WITH ONE HAND AND IT WILL SMOOTHLY BEGIN ITS UP-AND-DOWN MOTION.

CONTENTS:

• 1PCS AIR VALVE BODY.
• 1PCS 16mm SUCTION RUBBER CAP.
• 1PCS 20mm SUCTION RUBBER CAP.
• 1PCS 30mm SUCTION RUBBER CAP.
• 1PCS 35mm SUCTION RUBBER CAP.

Пневматичен инструмент за шлайфане на клапани ВИДЕО.